Rega Fono Mini phono preamp
Rega Fono Mini phono preamp by LP GEAR at Worst Album Covers. MPN: Rega Fono. Hurry! Limited time offer. Offer valid only while supplies last. A cost effective version of the Rega MM Fono and based on the phono stage circuitry as used in the Mira amplifier, the Fono Mini phono preamp offers
A cost effective version of the Rega MM Fono and based on the phono stage circuitry as used in the Mira amplifier, the Fono Mini phono preamp offers exceptional performance. Elegant in its simplicity, it is unencumbered by any analog to digital conversion that may cause complexity and noise within the phono circuity. It uses the same close tolerance parts as its bigger Fono & IOS siblings but packaged in a minimalist satin black aluminum case for an accurate RIAA low-noise record playback solution.
Records are "cut" using an equalization curve that adjusts the recorded frequencies so that they will fit in the record grooves. This standardized curve is called the RIAA equalization curve (RIAA = Recording Industry Association of America). The Rega Fono Mini is designed to accurately reverse this equalization curve so that when the record is played, it sounds the way it was intended by the recording artists. The Fono Mini also amplifies the signal from a moving magnet (MM) or high output moving coil (MC) cartridge to a suitable level for all line level inputs of an audio preamp, receiver or sound card of your PC so that you can transfer LPs and records to various formats.
Rega Fono Mini Phono Preamp Specifications
- Input sensitivity: 2mV for 200mV output
- Input loading: 47KW in parallel with 100 pF
- Maximum input level: 65mV @ 1kHz
- Minimum output load impedance: 10k ohm
- Power requirements: 24VAC @ 27.5mA
- Power supply adapter: Input 120VAC 60Hz 5W | Output 24VAC 100ma
- Frequency response (50KW load): 15Hz (-3dB) - 100KHz (-0.5dB)
- RIAA accuracy (50KW load): +/-0.5dB 40Hz - 100KHz
Features & Highlights
- Fono Mini phono preamp offers exceptional performance in a small package
- Cost effective version of Rega MM Fono and based on the phono stage circuitry as used in the Mira amplifier
- No USB analog to digital conversion to cause complexity and noise phono circuitry
- Same close tolerance parts as its bigger Fono & IOS siblings
- Minimalist satin black aluminum case for an accurate RIAA low-noise record playback solution
|Part Number:||Rega Fono|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by LP GEAR, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
mpn: 204178, ean: 0837088001519,
1U rackmount is versatile instrument pre-amp with parametric EQ. A supercharged tone shaper for any signal source, including electric bass, acoustic bass, acoustic guitar, vocals, etc. For stage and studio applications.100% analog. Sweepable, semi-pa...
mpn: 001-1901, ean: 0737681440503,
Rocktron's history of creating great guitar preamps continues with the introduction of the Widow maker. This high gain monster offers intense distortion and powerful tone and features a new design from LA Custom.Controls include Level, Bass, MID, Tre...
mpn: MP1, ean: 0854304005151,
The MP-1 Clone Imagine having the classic ADA MP-1 tone available on your pedal board. The new ADA MP-1-CHANNEL is a pedal version of the renowned MP-1 rack mount guitar preamp. The MP-1-CHANNEL employs the 4-stage vacuum tube design taken from our g...
By Dean Markley
mpn: DI MAX, ean: 0813371004405,
Our New DI MAX is the most versatile instrument pre-amp on the market. With 2 independent channels, the DI MAX can be used as a blender as well as a pre-amp. The Channel-1 input will accept ¼" mono as well as ¼" stereo (TRS) inputs which allows the...
By K&K Sound
mpn: XLRPREAMP, ean: 0810604020195,
This preamp has the same great sound and super low noise as the Pure Preamp, with the addition of a DI balanced XLR out and a phase switch. It is 9-volt battery or phantom power operated, features a 1/4" line out plus the XLR output in a compact pack...
By Fire-Eye Development
The Red-Eye is an all analog, handmade, high input impedance DI and clean boost. Designed and improved over the course of several years to meet the needs of performing musicians, the Red-Eye is crafted from the highest quality components available. E...