RADIO DESIGN LABS ST-PA6 RDL SIX-WATT UTILITY AMPLIFIER, FREQUENCY RESPONSE: 35 HZ-20 KHZ, THD: .35 %, INPUT: 10 KOHM, 400 MV (LINE LEVEL), POWER REQUIRE
RADIO DESIGN LABS ST-PA6 RDL SIX-WATT UTILITY AMPLIFIER, FREQUENCY RESPONSE: 35 HZ-20 KHZ, THD: .35 %, INPUT: 10 KOHM, 400 MV (LINE LEVEL), POWER REQUIRE by Radio Design Labs at Worst Album Covers. MPN: ST-PA6. Hurry! Limited time offer. Offer valid only while supplies last. Inputs (2): 10 kΩ balanced (may be wired balanced (may be wired Input Level: 400 mV (RMS) minimum (for rated power output) Frequency Response: 35 Hz to 20 kHz (+/- 1.5 dB w/EQ setting flat) Equalization: (Single-turn trimmer) Flat to +5 dB @ 60 Hz (center frequency of boost) Flat to +4 dB @ 100 Hz Flat to +3 dB @ 120 Hz THD+N: < 0.35% Noise: < -60 dB Output: 8 Ω unbalanced, 6 watts RMS Power Requirement: GROUND-REFERENCED, 24 to 33 Vdc @ 400 mA Ambient Operating Environment: -10 C to 50 C The
Product Description & Reviews
Inputs (2): 10 kΩ balanced (may be wired balanced (may be wired Input Level: 400 mV (RMS) minimum (for rated power output) Frequency Response: 35 Hz to 20 kHz (+/- 1.5 dB w/EQ setting flat) Equalization: (Single-turn trimmer) Flat to +5 dB @ 60 Hz (center frequency of boost) Flat to +4 dB @ 100 Hz Flat to +3 dB @ 120 Hz THD+N: < 0.35% Noise: < -60 dB Output: 8 Ω unbalanced, 6 watts RMS Power Requirement: GROUND-REFERENCED, 24 to 33 Vdc @ 400 mA Ambient Operating Environment: -10 C to 50 C The ST-PA6 represents the second generation of RDLs breakthrough in the traditional power vs. size ratio. Present technology permits features and performance at the most economical cost ever. The ST-PA6 offers 6 watts of power for a price you would expect to pay for 3 watts. The ST-PA6 features two balanced audio inputs, a gain control, equalization control and an 8 Ω output. The output is designed to deliver a clean 6 watts RMS into an 8 Ω speaker. Each input is a balanced bridge, with the two inputs actively mixed equally. This is particularly useful for monitoring a stereo line. The output stage features protection against short-circuits and thermal overload. The output protection automatically resets once the condition is removed, making fuse protection unnecessary.
Features & Highlights
- RDL SILICON X -WATT UTILITY AMPLIFIER, FREQUENCY RESPONSE: 35 HZ~20 KHZ, THD: 0.35 %, INPUT: 10
- KILOHM, 400 MV (LINE LEVEL), POWER REQU
|Manufacturer:||Radio Design Labs|
|Brand:||Radio Design Labs|
|Publisher:||Radio Design Labs|
|Studio:||Radio Design Labs|
|Package Size:||3 x 1 x 1 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Radio Design Labs, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
mpn: 2SA1494, ean: 6922367690417,
Parameters: Input voltage:DC+-30V to DC+-80V speaker protection: 12-18V Power：300W+300W PCB size：170*100MM It need Additional rectifier filter plate Package:1pc Amplifier BoardInput voltage:DC+-30V to DC+-80V. speaker protection: 12-18V. Power：300W+300W. PCB size：170*100MM.
By BOSS Audio
mpn: 61947, ean: 0613815626299,
Boss Audio Armor AR2000M 2000 Watt Monoblock Car Amplifier
Total Power Output 2000 Watts
Peak Power @ 2 2000 Watts x 1
RMS Power @ 4 1000 Watts x 1
Amp Topology Monoblock, Class A/B
Channel Configuration 1 Channel
Wired Bass Remote Included
Power Supply Type MOSFET Power Supply
Speaker Impedance 2-8 Ohms
T.H.D. (Total Harmonic Distortion) 0.01 %
S/N Ratio (A-Weighted) 105 dB
Frequency Response 9 Hz to 130 Hz 1 dB
Connections, Controls, and Processing
RCA Inputs 2
sku: DOBA-DE6754, mpn: PTAU23, ean: 0068888901550,
MINI 2X40 WATT STEREO POWERAMPLIFIER W/ USB/AUX IN.pyle ptau23 mini 2x40 watt stereo poweramplifier w/ usb/aux inputs. pyle audio - home a/v ptau23 mini 2x40 watt stereo power amplifier w/ usb/aux inputs.
TPA3116 Power amplifier chip. Dual channel 2*50W,PBTL single channel 100W,high efficiency and low-heat. Powered by DC 11-26V, input band limit reverse connection protection. Applicable speaker impedance: 4-8 ohm. Just connect the power supply and loudspeaker box, enjoy the pure digital music! Notice: This amplifier board must be powered by DC power(DC11-26V),Recommended DC 24V current 3A and above switching power supply. Specifications: Supply Voltage: DC 11-26V Chip: TPA3116 Channel Type:
By Dong Yu Yuan
mpn: 6901219646994, ean: 6901219646994,
If you need more details,please contact us.TPA3116 Dual Channel 50W * 2 Digital Amplifier Board PBTL 100W Mono High Power Amplifier ModuleDigital amplifier boardPower amplifier chip: TPA3116Supply voltage:11 ~ 26VDC DC input with limit reverse polarity protection(Recommended DC 24V current 3A and above switching power supply)Output power: stereo 50W + 50W, PBTL monaural 100WLoad impedance: 4 to 8 ohms (horn speaker impedance)Audio input: 2.54mm3 pin seatStereo two-channel connection as shown
By Fitness Audio
Pool-side and small group instruction just got easier with the Fitness Audio Personal PA 5. Fully self contained amplifier, speaker, headset microphone, and built-in belt strap around your waist and you're ready to go. The FA PPA5 also comes with a charger/AC unit for use with rechargeable batteries (6x AA - not included). At just over a pound, this unit delivers big sound for small groups of 10-15. Great for deck side instruction, class room lectures, group tours, and bicycle and inline skate
mpn: TPA3116 2.1,
Parameters: Operating voltage range: Operating voltage range: DC 9-25V (Current 3-4A or more, such as the need for more power recommended 19-24V / 4-5A above) Maximum output power: 50W(Left CH)+50W(Right CH)+100W(BASS CH) Core Chip: TPA3116D2 Audio input sensitivity: 600-800Mv Frequency response range: 20Hz-20KHz Speaker impedance: L/R CH speaker 3.5-8Ω ， BASS speaker 2-8Ω Instructions: 1. The power supply can be accessed from DC socket, or Terminal block socket. 2. Audio from 3.5mm socket
Features: TDA2030A 2.1 3-Channel Subwoofer Power Amplifier Board, 18Wx3 power, peak up to 25W. High SNR, almost no static noise, super good sound quality: treble fine, soft, transparent, bass solid, full, strong. The core of the circuit is three ST brand new TDA2030A integrated blocks, two of which are responsible for the left and right channels, and the other one is for subwoofer use. A dual op amp NE5532 is used for bass preamplifier to make the bass strong and powerful, and the treble is
200W Peak (100W RMS) 2-Channel Ultra-Compact Class D Power Sports Amplifier for Install in Car, Off-Road, SSV and more...25 Watts RMS x 2 @ 4 ohms. 50 Watts RMS x 2 @ 2 ohms. Total Peak Power: 200 Watts. Fixed high-pass filter: 80 Hz. Frequency Response: 11 - 40,000 Hz.
mpn: OS03961+OS03957-1, ean: 0701772001355,
Built-in loudspeaker protection circuit triggers when the amplifier is turned on to protect speakers from high volume bursts of audio.
Over-voltage protection circuit shuts down amplifier should input voltage exceed 14.4 Volts DC.
State of the art design using surface mount components and advanced engineering for proven performance, reduced signal interference and long operation life.
Fashion, lightweight and easy to carry.
DC12V switching stable