AMT Electronics Tube Guitar Series SS-20 Guitar Preamp
AMT Electronics Tube Guitar Series SS-20 Guitar Preamp by AMT Electronics at Worst Album Covers. MPN: SS-20. Hurry! Limited time offer. Offer valid only while supplies last. The SS-20 Guitar Preamp from AMT Electronics has incredible Clean, Overdrive, Distortion, and Lead tones in a compact tube valve driven pedal. AMT is
The SS-20 Guitar Preamp from AMT Electronics has incredible Clean, Overdrive, Distortion, and Lead tones in a compact tube valve driven pedal. AMT is raising the bar in guitar pedal design and offers affordable high end tone pedals. This one is going to be finding its way onto lots of pedalboards. AMT's principle and motto for this device is it is the VALVE that sounds and sings, however, the transistors do their best to help it sound in all its beauty and originality. In order to achieve the full opening of input valve cascades working in the "hottest" conditions the giant amplitude of one hundred and more volts is necessary. The dynamic properties characteristic to valve — based preamps are implemented in the SS-20 preamp due to the elimination of signal limiting OA (feed level of 20-25V) in the part of preliminary amplification and using special cascades capable of reaching 250V amplitude with nonlinearity similar to a 12AX7 triode. Thus, AMT has managed to achieve full dynamic characteristics of guitar signal without usual hybrid "squeeze" as well as assign special sound character to SS-20. Special attention was also paid to to the SS-20's clean channel — in this section AMT has also followed the way of preserving the dynamics of guitar signal with simultaneous formation of soft "nonlinearity" inherent in the cascades on vacuum triodes. It also allowed us to escape both the "squeeze" and "refinement" peculiar to many clean-channels of hybrid devices. The basis of the inner preamp structure is the principle of maximum use of amplification and nonlinear transformation of the valve part of the device. Thus, the semi-conductor part of the hybrid practically does not participate in the sound limitation (except for the use of preamp in LEAD mode at Gain LEAD level of higher than 7) and the entire spectrum is formed by the valve preamp part. In the preamp stage the quantity of semi-conductor cascades is not used in the sound processing, and in the absence o
Features & Highlights
- Two high-grade channels CLEAN and DRIVE with the possibility of Drive-channel operation in two basic modes: moderate sensitivity
- Effects Loop Send and Return.
- Operation via both direct unaltered signal for guitar amplifiers heads, combos, and speakers (OUTPUT jack) as well as speaker
- Cabinet emulator in direct out mode
- High-grade high-voltage feed of triodes.
|Item Weight:||1.85 pounds|
|Package Weight:||2 pounds|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by AMT Electronics, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
By K&K Sound
mpn: KK902, ean: 0810604020300,
To get the best possible sound from your acoustic instrument, it may be necessary to install a combination of two pickup systems. For this purpose we designed the Dual Channel Pro Preamp, a two channel mixer with a belt clip. It allows the mixing of ...
mpn: PDI03JB, ean: 0084749291448,
Speaker Simulators have changed the way guitars are recorded and integrated into the FOH and monitor mixes on club and concert stages all over the world. They have made their way into the arsenals of many major guitar players and sound engineers, and...
mpn: GCS3, ean: 0854304005120,
The ADA GCS family are ideally suited for live performance and studio applications. A unique feature of the GCS' is that it replicates the low frequency natural resonance of a guitar speaker cabinet at loud volumes, which is especially noticeable in...
mpn: PA10021, ean: 0888365200842,
EDM-1 Mini Direct Preamp. The EDM-1 from Headway Music is the next addition to their range of acoustic pickups and pre-amplifiers. Building on the success of their popular EDB-1 Equalizer Direct Blend Pre-amp, the EDM-1 boasts refined "Class A" input...
mpn: PRO-AUR-SPC, ean: 0714573528310,
Includes 1 Year Free Extended Warranty. The complete performance technology solution for acoustic musicians. The Aura Spectrum DI features award-winning Aura Acoustic Imaging technology that enables players to mix studio-mic'd sound with the signal ...
By LR Baggs
sku: 307113, mpn: Mixpro, ean: 0897042002143,
The Mixpro is a 2-channel belt clip mixing preamp...
By Radial Engineering
sku: 2064, mpn: PZ-Pre, ean: 0676101037902,
The Radial Tonebone PZ-Pre 2-channel instrument preamplifier is a feature-loaded onstage essential! With a 3-band EQ, variable notch filter, and high-pass filter, the Radial Tonebone PZ-Pre helps you kill feedback quickly and easily, and separate pie...
mpn: CTP-2, ean: 0736021110014,
Cool Tube 2 PreampThe midrange frequency can be cut or boosted with the mid slider. The range of frequency covered by the rotary knob is 200hz to 8.5Khz.. With this control, the player chooses the depth of effect the tube places on the signal generat...
By K&K Sound
mpn: Dual Channel Pro ST, ean: 0810604020317,
Note! This product is identical to the K&K Dual Channel Pro Preamp, except that it has one stereo input instead of two mono 1/4" inputs, and two mono 1/4" output jacks. To get the best possible sound from your acoustic instrument, it may be necessary...
mpn: R8007085 BUNDLE, ean: 0702706619325,
The Radial Tonebone PZ-PreTM is the most powerful acoustic preamplifier ever to be put inside a pedal. And when we say acoustic, we do not just mean acoustic guitar - we mean ANY acoustic instrument including banjo, violin, cello, mandolin, contrabas...